Copyright © 2021 Nortek Security & Control LLC
13
System Status Messages
At the top-left of the screen, different messages appear to reveal the current system state.
System Status Messages
This table describes the different system status messages on the system.
This system status message ... Indicates that ...
System Ready To Arm Indicates all sensors are closed and the system is ready to be armed.
System Not Ready to Arm One or more sensors are open.
System Ready To Arm (BYPASS)
The system is ready to arm and one or more sensors are on the Bypassed Sensors list.
See
Force Bypassing, pg. 23.
System Arming (STAY) The system is in the process of arming itself in Stay Mode.
System Arming (AWAY) The system is in the process of arming itself in Away Mode.
System Armed (Stay)
System Armed (Away)
The system is armed and protecting the premises in STAY or AWAY mode.
Restarting Security Process
The security system is restarting. Typically, this only appears after an installer modies a
System Conguration setting.
System Icons
The status bar that appears on the top of the Home screen and on most system menus reveals a variety of icons
providing system information and access to different functions.
System Status Bar
System Icons
Status Icons Action Icons
Battery Power Status Notications
Battery Charging Turn Display Sleep Mode On
On-Board Camera is active Audible Beeps On
Power Audible Beeps Off
Power Disconnected Update is available
To Next Page
Loading...
Need help?
General
