2gig Technologies EDGE - Facial Recognition Disarming and Errors

27
Copyright © 2021 Nortek Security & Control LLC
Disarm the System
When the system is armed, the Armed (Stay or Away)
screen is displayed.
To disarm the system:
1. Tap the DISARM button.
2. To disarm with Facial Recognition, align the
user’s face within the frame of the camera,
slightly moving the head from side to side.
OR
3. Tap the KEYPAD button to access the keypad
and disarm using the disarm code.
IMPORTANT: Facial Recognition does not detect
Duress. During a Duress situation, avoid making
the face detection gesture. Instead, tap KEYPAD
then enter duress code.
4. (OPTIONAL) Enter the Duress Code.
The system disarms and transmits a silent duress report
to the Remote Service Provider.
Disarm the System
Disarm with Facial Recognition
Facial Recognition Prole Update
Due to differences in lighting and other factors during
Facial Recognition disarming, there may be times when
the panel prompts Face Not Recognized.
When this occurs, the Enter Code screen will appear, so
the panel can be disarmed using the designated four or
six digit disarming code.
NOTE: See Users, page 47, for Facial
Recognition setup instructions.
Face Not Recognized
1. Enter the four or six digit code to disarm.
Enter Code