To Next Page

To Previous Page

Use and Care of the System

To care for the system, observe the following:

Humidity and Liquids Do not expose the system to water, rain, extreme humidity, perspiration, or other liquids.

The optimum humidity range for the system is 9-90% non-condensing.

Extreme Heat or Cold Do not expose the system to extreme heat or cold. The optimum operating temperature

range is: 32 F to 104 F (0 C to 40 C). Do not expose system to direct sunlight.

Shock and Vibration For optimum protection against shock and vibration, make sure that your installer has

securely mounted the touchscreen ush against the wall or properly installed it in a compatible desktop kit.

IMPORTANT: To prevent touchscreen damage during cleaning, see Screensaver: Clean Mode, pg. 42.

ANSI/SIA CP-01-2010 2GIG System Feature User Guide

4.2.2.1 Exit Time Exit Delay "Important Concepts" "Arm the System"

4.2.2.2 Progress Annunciation Exit Delay Announcement "Important Concepts" "Arm the System"

4.2.2.3 Exit Time Restart Exit Delay Restart "Important Concepts" "Arm the System"

4.2.2.4 Exit Error Exit Error "In the event of an Exit Error"

4.2.2.5 Unvacated Premises Auto Stay "Arm the System (Away Mode)"

4.2.3.1 Entry Delay Entry Delay "Important Concepts" "Disarming the System"

4.2.3.3 Disarm Disarming Features "Disarms the Alarm System"

4.2.4.1 Control Buttons Keyfob/Remote Arming Mode on System Not Ready "Remote Control Devices"

4.2.4.2 Manual Alarms Emergency Alarm Features "Activate a Manual Panic, Fire, or Emergency Alarm"

4.2.4.3 System Acknowledgement

Alert Keyfob Disarming Afte Alarm, Keyfob Arm/Disarm,

Conrmation

"Arming the System Using a Keyfob"

4.2.4.4 Remote Alarming Keyfob Arming "Arming the System Using a Keyfob"

4.2.4.5 Remote Disarming Keyfob Disarming "Disarming the System Using a Keyfob"

4.2.5.1 Abort Window Abort Window Dialer Delay "In the Event of a Burglary Alarm"

4.2.5.1.1 Disarm Alarm Annunciation Silence "In the Event of a Burglary Alarm"

4.2.5.1.2 Abort Abort Window Alarm Cancel "In the Event of a Burglary Alarm"

4.2.5.2 Alarm Transmission Alarm Signal Sent "In the Event of a Burglary Alarm"

4.2.5.3 Disarm Panel Alarm Annunciation "Disarming the System"

4.2.5.4 Cancel Window Alarm Cancel Time, Alarm Cancel Display "In the Event of a Burglary Alarm" "Silence a False Alarm"

4.2.6.1 Use of Duress Feature User Duress Report "Transmit a User Duress Report"

4.2.6.2 Duress Code Duress Code "Types of User Codes" "Users"

4.2.7 Initiation of Manual Alarms Panic, Fire, or Emergency Alarm "Activate a Manual Panic, Fire, or Emergency Alarm"

4.3.1 Cross Zoning Cross Zone Verication "Cross Sensor Zones"

4.3.2 Swinger Shutdown Swinger Trouble "Sensor Trip Error"

4.3.3 Fire Alarm Fire & Carbon Monoxide Protection "Fire & Carbon Monoxide Protection"

4.6.3 System Test Panel Test, Sensor Test "Testing the System"

4.6.6 Test in Progress Test is in Progress "Testing in Progress"

2gig Technologies EDGE User Manual

Other manuals for 2gig Technologies EDGE