2gig Technologies GC3 User Manual

ANSI/SIA CP-01-2010 2GIG System Feature UserGuide
4.2.6.1 Use of Duress Feature User Duress Report "Transmit a User Duress Report" on page 35.
4.2.6.2 Duress Code Duress Code "Types of User Codes" on page 63
"Users" on page 63.
4.2.7 Initiation of Manual Alarms Panic, Fire, or Emergency Alarm "Activate a Manual Panic,Fire, or Emergency Alarm" on page 45.
4.3.1 Cross Zoning Cross Sensor Zones, Cross
Sensor Timeout
"Q24: Cross Sensor Zones (99-100) " on page1
"Q25: Cross Sensor Timeout, in Seconds (10-120)" on page1
4.3.2 Swinger Shutdown Swinger Shutdown Count (1-6) "Swinger Shutdown Count (1-6)" on page1.
4.3.3 Fire Alarms Fire &Carbon Monoxide
Protection
"Fire &Carbon Monoxide Protection" on page 38
4.6.3 SystemTest
Console Test
Sensors Test
"SystemTests" on page 77
4.6.4 Initiation of Test Console Test
Sensors Test
"SystemTests" on page1
4.6.5 Communications
Console Test
Sensors Test
"SystemTests" on page1
4.6.6 Test in Progress Console Test
Sensors Test
"SystemTests" on page1
4.6.7 AutomaticTermination of Test
Console Test
Sensors Test
"SystemTests" on page1
2 SystemOverview Proprietary &Confidential
15 Copyright © 2015 Nortek Security &Control LLC

2gig Technologies GC3 Specifications

General

Brand	2gig Technologies
Model	GC3
Category	Security System
Language	English