2gig Technologies GC3 User Manual

Using the System Menus
Across the bottom of the Home screen, users can tap a button to access
other menus. These menus include Smart Home Controls, System
Info and Usage, and System Settings.
Figure 22 System Menus
Smart Home Controls
Tap the Smart Home Controls button on the Home screen to reveal the
Smart Home Controls menu. These options give users the ability to
operate any Z-Wave smart home controls (if installed) directly from the
GC3 Panel. To learn about options in this menu, see "About the Smart
Home Controls Menu" on page 51.
Figure 23 Smart Home Controls Menu
If the Smart Home Controls menu is not configured on your system, the
following notification message appears when you tap the Smart Home
Controls button. Tap OK to dismiss the message.
NOTE: Consult your installer for information about enabling
the Smart Home Controls feature on your system.
Figure 24 Feature Not Currently Activated Message
System Info and Usage
Tap the System Info and Usage button on the Home screen to reveal
the System Info and Usage menu. This menu provides users with
access to energy usage information, sensor information, system history,
and contact information for your 2GIG alarm dealer. To learn about the
options in this menu, see "System Info and Usage" on page 59.
Figure 25 System Info and Usage Menu
System Settings
Tap the System Settings button on the Home screen to reveal the
System Settings menu. This menu gives users access to general
settings for the GC3 Security & Automation System. To learn about the
options in this menu, see "System Settings" on page1.
NOTE: This feature is PIN-protected. To use this feature,
you must know the four-digit Master User Code.
Figure 26 System Settings Menu
3 Touchscreen Basics Proprietary &Confidential
25 Copyright © 2015 Nortek Security &Control LLC

2gig Technologies GC3 Specifications

General

Brand	2gig Technologies
Model	GC3
Category	Security System
Language	English