3Com 3CRGPC10075 - Configuring TCP;IP on Windows

130 APPENDIX D: CONFIGURING THE TCP/IP SETTINGS OF WIRELESS STATIONS
Configuring TCP/IP
on Windows
Me/98/95
To configure the TCP/IP settings of a wireless station that is running
Windows Me, 9x, or 95:
1 From the Start menu, point to Settings, and then click Control Panel.
2 Double-click Network. The Network dialog box appears, as shown in
Figure 60
.
Figure 60 Network Dialog Box on Windows Me/98/95
3 Select the TCP/IP component for the wireless network card, and then click
Properties. The TCP/IP Properties dialog box, as shown in Figure 61
,
appears.
Figure 61 TCP/IP Properties Dialog Box
4 Verify that the TCP/IP settings are correct.