Defining Security Profiles 31
Configuring Encryption and Authentication
This section lists the configuration options for each available encryption
and authentication method.
WEP Options
If you selected WEP, you need to configure the settings listed in Table 6
.
Figure 14 Security Options for WEP
Table 6 Options for WEP
Option Description
Data Encryption Select the preferred WEP encryption level, and ensure that
wireless stations have the same setting and key value
Authentication Normally, you can simply set this to Automatic. However, if
authentication fails, select the appropriate value – either
Open System or Shared Key. Check your wireless card's
documentation to determine the correct authentication
method to use.
Key input Click either Hex (0~9 and A~F) or ASCII depending on your
input method. All keys are converted to Hex; ASCII input is
only provided for convenience.
Key values Type the keys that you want to use. Other stations must have
the same key. Alternatively, you can automatically generate
keys by clicking Generate Key in Passphrase.
To Next Page
Loading...
