128 APPENDIX D: CONFIGURING THE TCP/IP SETTINGS OF WIRELESS STATIONS
Configuring TCP/IP
on Windows 2000
To configure the TCP/IP settings of a wireless station that is running
Windows 2000:
1 From the Start menu, point to Settings, and then click Network and
Dial-up Connections.
2 Right-click the local area network connection that you want to configure,
and then click Properties. The Local Area Network Connection window
appears, as shown in Figure 58
.
Figure 58 Local Area Connection Properties Dialog Box on Windows 2000
3 Click Internet Protocol (TCP/IP), and then click Properties. The TCP/IP
Properties dialog box, as shown in Figure 61
, appears.
To Next Page
Loading...
