Viewing Information About the Device 85
If you have a syslog server on the network, you can automate this process
by configuring the Access Point to forward its log entries to the syslog
server. For information, refer to “
Sending Device Logs to a Syslog Server”
on page 88
.
To save the logs to a file:
1 On the Log screen, click Save to File. The File Download dialog box
appears.
2 Click Save, and then choose as location on local disk.
3 Rename the file, if necessary. The default file name is
ap11g.log.
4 Click Save.
To purge logs that are currently saved on the device, click Clear Log. The
screen refreshes, and then displays a blank Log screen.
Viewing Device
Statistics
Figure 46 Statistics Screen
To view statistics about the device:
1 On the menu, click Status.
2 Click the Statistics tab.
To Next Page
Loading...
