32 CHAPTER 3: CONFIGURING THE ACCESS POINT
WPA-PSK Options
If you selected WPA-PSK, you need to configure the settings listed in
Table 7
.
Figure 15 Security Options for WPA-PSK
Passphrase To generate WEP keys, type a word or group of printable
characters in this text box, and then click Generate Key. If
encryption strength is set to 64 bit, each of the four key
fields will be populated with key values. If encryption
strength is set to 128 bit, only the selected WEP key field will
be given a key value.
Table 7 Options for WPA-PSK
Option Description
Network Key Type the key value. Data is encrypted using this key. Other
wireless stations must use the same key.
Table 6 Options for WEP
Option Description
To Next Page
Loading...
