A&D BM-252 - Page 10

8 BM series
Common accessories
Attach the AC adapter labels to the AC adapter
as shown in the illustration.
AC adapter AC adapter labels
Notes
Please confirm that the AC adapter type is correct for your local
voltage and receptacle type.
Please use the dedicated AC adapter specified for the balance.
Do not use the AC adapter provided with the balance for other
models or equipment with which the AC adapter may not be
compatible.
If you use the wrong AC adapter, the balance and other equipment
may not operate properly.
Data logger
AD-1688
The weighing data can be
stored when connected to
the RS-232C interface of
the balance.
USB cable
(approx. 1.8 m)
Display cover
(PET resin)
Separation plate
If unnecessary, remove it.
Tweezers
AD-1689
Tweezers for handling a weight.
Use it to avoid temperature changes
due to having your hand in the
weighing chamber, thus to perform
accurate calibration.
Body cover
Cover during storage to prevent dust and dirt contamination.
The cover can be used for the balance with the AC adapter and other cables
connected.
D-sub 9 pins
Positions to
p
lace the AC ada
p
ter labels