ABB AC31 - 1.5.3.2.8 Technical data; Technical Data of the complete device

Fig. 65: 07AI91-AD_Front
1.5.3.2.8 Technical data
This section provides additional information on section Ä Chapter 1.3 “System data and CS31
bus system data” on page 4. In case of doubt, the following information applies.
Technical Data of the complete device
Data Value
Process voltage:
-> Connections X4/L+ (pin 18), X4/L+ (pin 19), X4/M (pin 20),
X4/M (pin 21)
-> Fuse for L+ 10 A, fast acting
- Electrical isolation No
Current consumption:
-> via L+ 0.19 A
- Inrush current via L+ (when voltage is
switched on)
0.22 A
2
s
Power consumption Replacement device: 6 W
Existing device: 3 W
Address setting and configuration DIP switch right side of housing
Max. line length of analog lines, line cross
section > 0.14 mm²
100 m
AC31 Adapters
Replacement devices: I/O modules > Replacement device 07AI91-AD
2018/09/24 3ADR010122, 8, en_US 103