ABB AC31 - 1.4.1.3 Device Configuration and Electrical Connection

*) Ä Further information on page 25
Table 11: Comparison: Replacement device versions
07KT94-
ARC-AD
07KT98-
ARC-AD
07KT98-
ARC-DP-
AD
07KT98-
ARC-ETH-
AD
07KT98-
ETH-DP-
AD
07KT98-
ARC-ETH-
DP-AD
ARCNET x x x x - x
PROFIBUS - - x - x x
Ethernet - - - x x x
CS31 x x x x x x
Parallel
interface for
connection
to coupler
- x x x x x
Cycle time
for 1
instruction
CPU
EC581: n.a.
*) *) *) *) *)
*) CPU PM590: -> Binary: min. 0.002 µs, -> word: min. 0.004 µs, -> floating point: min. 0.004 µs
To get an overview of the the available versions for 07 KT 98 central units, please refer to pre-
vious chapter Ä Table 11 “Comparison: Replacement device versions” on page 23.
The 07KT9x-AD systems use memory cards of the type "SD Memory Card MC502".
1.4.1.3 Device configuration
Fig. 17: 3ADR333186F0015_07KT98-ETH-DP-AD_Front
For information on the available I/O modules DA501 and DA502, please refer to the AC500 doc-
umentation. The CPU module used (here: PM590) depends on the model version.
Available ver-
sions
Suitable Smart-
Media cards
AC31 Adapters
Replacement devices: CPU > Replacement device 07KT9x-AD
2018/09/24 3ADR010122, 8, en_US 23