ABB AC31 - Connection to the CS31 bus; Mechanical data; Mounting information; Ordering data

Connection to the CS31 bus
Data Value
Connections X1 / B2, X1 / B1
CS31 bus type 01 (analog input)
Termination resistor Not available (must be provided externally if
needed)
Mechanical data
Data Value
Width x height x depth Replacement device: 120 x 140 x approx. 80
mm
Existing device: 120 x 140 x 85 mm
Weight Replacement device: 384 g
Existing device: 450 g
Dimensions for mounting See operating and assembly instructions of
the replacement device (3ADR020086M0401)
Mounting information
The dimensions for the assembly holes are the same for the replacement
device and the existing device.
To assemble or disassemble the replacement device, grab the device at the housing and not
directly at the S500 module.
Ordering data
Order No. Scope of delivery
1SAP 800 200 R0010 Analog input module 07AI91-AD
1x 3-pole terminal block
3x 5-pole terminal blocks
2x 9-pole terminal blocks
AC31 Adapters
Replacement devices: I/O modules > Replacement device 07AI91-AD
2018/09/243ADR010122, 8, en_US106