ABB AC31 - 1.5.2.8 Technical Data; 1.5.2.8.1 Technical Data of the complete device

Fig. 51: LEDs DO524
1.5.2.8 Technical Data
This section provides additional information on section Ä Chapter 1.3 “System data and CS31
bus system data” on page 4. In case of doubt, the following information applies.
1.5.2.8.1 Technical Data of the complete device
Data Value
Process voltage:
-> Connections L+ X2 (pin 13)
X3 (pin 23),
X4 (pin 24, pin 25)
X5 (pin 38),
X6 (pin 48)
-> Connections M X2 (pin 4)
X3 (pin 14)
X4 (pin 26, pin 27)
X5 (pin 29)
X6 (pin 39)
-> Fuse for L+ 10 A, fast acting
- Electrical isolation None (07DC92: Group against group, all
groups in relation to the rest of the device
Current consumption:
-> via L+ 0.19 A and max. 0.5 A per output
- Inrush current via L+ (when voltage is
switched on)
0.17 A²s
AC31 Adapters
Replacement devices: I/O modules > Replacement device 07DC92-AD
2018/09/243ADR010122, 8, en_US82