When using a control system (PLC/central unit) that is configured via the Auto-
mation Builder software (e.g. 07KT98-ARC-AD), the connection element
ANAI4_20 is no longer available.
1.5.5.2.1 LED display
The LED display on the replacement device is changed:
Fig. 76: AX522
No. Display of module
1 8 yellow LEDs to indicate the signal status of the analog inputs (X2 and X3)
2 8 yellow LEDs to indicate the signal status of the analog inputs (X6 and X7)
3 2 red LEDs to indicate errors (of AX522 module)
4 1 green LED to indicate the status of the supply voltage of the AX522 module (is
supplied via X4)
The replacement device does not provide a test button to measure functionality.
Replacement devices: I/O modules > Replacement device 07AC91-AD2
2018/09/24 3ADR010122, 8, en_US 123
To Next Page
Loading...
