Fig. 43: Front view: DC532
1.5.1.8 Technical data
This section provides additional information on section
Ä
Chapter 1.3 “System data and CS31
bus system data” on page 4. In case of doubt, the following information applies.
1.5.1.8.1 Technical Data of the complete device
Data Value
Process voltage:
-> Connections X4/L+ (pin 22), X4/L+ (pin 23), X4/M (pin 24),
X4/M (pin 25)
-> Fuse for L+ 10 A, fast acting
- Electrical isolation No
Current consumption:
-> via L+ 0.19 A and max. 0.5 A per output
- Inrush current via L+ (when voltage is
switched on)
0.17 A²s
Power consumption Replacement device: 200 W
Existing device: 202 W
Max. power dissipation within the module (out-
puts unloaded)
Replacement device: 6 W
Existing device: 5 W
Address setting and configuration DIP switch on right side of the housing
Operating and error indications Replacement device: 41 LEDs
Existing device: 33 LEDs
Replacement devices: I/O modules > Replacement device 07DC91-AD
2018/09/243ADR010122, 8, en_US68
To Next Page
Loading...
