To assemble or disassemble the replacement device, grab the device at the housing and not
directly at the S500 module.
CAUTION!
System damage caused by voltage!
The exchange of a replacement device under voltage can cause permanent
system damage (destruction).
1.5.1.8.8 Ordering data
Order No. Scope of delivery
1SAP 800 300 R0010 Digital input/output module 07DC91-AD
1x 5-pole terminal block (5.08 mm grid space)
1x 3-pole terminal block (5.08 mm grid space)
4x 9-pole terminal blocks (3.81 mm grid
space)
1.5.2 Replacement device 07DC92-AD
Fig. 45: 3ADR333196F0015_07DC92-AD
The replacement device 07DC92-AD of the AC31 adapter series replaces the existing device
07DC92 of the 90 series.
During the development of the replacement device, care was taken to keep the device configu-
ration identical to the configuration of the existing device. Thus, the existing documentation of
device 07DC92 remains valid and serves as a reference
(system description Advant Controller 31). The document structure of this document is based on
the document structure of the existing documentation.
Replacement devices: I/O modules > Replacement device 07DC92-AD
2018/09/243ADR010122, 8, en_US72
To Next Page
Loading...
