Fig. 27: 07KT98_Measuring_Ranges ± 10 V / 0 ... 10 V
Due to the internal electrical isolation of the sensor voltage supply, no change to the wiring is
necessary.
UP must be connected to connectors X7, X8 and X9. The internal voltage
supply to the ADC channels is no longer provided by L+ but by UP in the mod-
ules DA501 and DA502.
Measuring
ranges
Replacement devices: CPU > Replacement device 07KT9x-AD
2018/09/24 3ADR010122, 8, en_US 35
To Next Page
Loading...
