ABB ACS860 - Page 94

94 Parameters
51 FBA A settings Fieldbus adapter A configuration. 253
52 FBA A data in Selection of data to be transferred from drive to fieldbus controller
through fieldbus adapter A.
255
53 FBA A data out Selection of data to be transferred from fieldbus controller to drive
through fieldbus adapter A.
255
58 Embedded fieldbus Configuration of the embedded fieldbus (EFB) interface. 256
60 DDCS communication DDCS communication configuration. 263
61 D2D and DDCS transmit
data
Defines the data sent to the DDCS link. 270
62 D2D and DDCS receive
data
Mapping of data received through the DDCS link. 274
90 Feedback selection Motor and load feedback configuration. 278
91 Encoder module settings Configuration of encoder interface modules. 284
92 Encoder 1 configuration Settings for encoder 1. 285
95 HW configuration Various hardware-related settings. 287
96 System Language selection; access levels; macro selection; parameter
save and restore; control unit reboot; user parameter sets; data
logger triggering; parameter checksum calculation; user lock.
292
97 Motor control Motor model settings. 302
98 User motor parameters Motor values supplied by the user that are used in the motor
model.
304
99 Motor data Motor configuration settings. 305
Group Contents Page