Ordering information 201
Control panel (2×R8i)
The control panel is not included with the supply / inverter modules but must be ordered
separately. One control panel is required for the commissioning of an ACS880 drive
system, even if the Drive composer PC tool is used.
The control panel can be flush mounted on the cabinet door with the help of a door
mounting kit. For more information on the control panel, see ACX-AP-x assistant control
panels user’s manual (3AUA0000085685 [English]). For the dimension drawing, see
section DPMP-01 door mounting kit on page 389.
The door mounting kit contains:
• front cover
• flat cable (between DDPI-01 board and the panel)
• DDPI-01 board, cover and M4×8 Combi screw for the cover
• EMC shield
• control panel mounting platform
• grounding wire
• Ethernet cable (3 m)
• DPMP-01 mounting platform for ACS-AP control panel installation guide
(3AUA0000100140 [English]).
Type Description Ordering code Illustration
ACS-AP-W
Control panel with
Bluetooth
3AXD50000025965
DPMP-01
Door mounting kit
(IP55)
3AUA0000108878
To Next Page
Loading...
