262 Ordering information
3×D8T + 4×R8i, 6-pulse
ACS880-04 single drive module packages
Delivery of the ACS880-04 single drive module package includes the following items:
Note: The following components are always required to construct a working unit and must
be ordered separately:
• BCU control unit kits (one for supply, one for inverter),
• fiber optic cables,
• RDCO-04C DDCS communication option modules (68882915, one for supply, one for
inverter),
• common mode filters (consists of two toroidal cores, 2 × 3AUA0000032859) for each
inverter module,
• control circuit plug connectors (3AUA0000059813) for each module,
• quick connectors (3AUA0000119227) for each module.
Suitable kits and components for each ACS880-04 type are listed in this chapter.
The other parts listed in this chapter
• may be required by the application, or
• make the installation or use of the module easier.
Control electronics for D8T modules
Cabling of the electronics outside the supply and inverter module must be done by the
customer. The current consumption of the main components in the auxiliary circuit is
shown in Auxiliary circuit current consumption on page 335.
Control unit
Supply modules and inverter modules require their own control units. The delivery includes
the control units.
The BCU control unit kit contains:
• BCU control unit
• ZMU memory unit with the control program.
Ordering code Contents and option codes
ACS880-04-2300A-7 • Supply and inverter modules with speed-controlled cooling
fans
•+C132: Marine type approval. For more information, see
ACS880 +C132 marine type-approved drive modules and
module packages supplement (3AXD50000037752
[English]).
• +C183: Heating element mounted to module base
• +C188: Direct-on-line cooling fan
• +E205: Internal du/dt filters
• +G304: 115 V auxiliary voltage supply
ACS880-04-…
Control unit kit Qty Ordering code
Type
U
N
= 690 V (Range 525 … 690 V)
2300A-7 BCU-12 KIT for DxT 1 3AXD50000006351
To Next Page
Loading...
