272 Ordering information
DC-side components (2×D7T, Rittal TS 8 enclosure)
Common DC Flat-PLS assembly
When using the Rittal Flat-PLS system, this kit is used for correct positioning of the
common DC bus in the Rittal TS 8 enclosure.
Note: The designs presented in this manual for Rittal TS 8 enclosures employ the Rittal
Flat-PLS busbar system. Make sure that the current carrying capability of the busbars is
not exceeded at any point of the drive system.
DC busbars
DC busbars provide connection from the module DC output to the common DC bus.
Cabinet ventilation kits
See section Cabinet ventilation kits (600 mm) on page 209.
Frame
size
Enclosure Qty Ordering code Kit code Illustration
All 600 mm 1 3AUA0000115906 A-468-X-001
Instruction code: 3AUA0000115891
Frame
size
Enclosure Qty Ordering code Kit code Illustration
2×D7T 600 mm 1 - -
See instruction 3AXD50000009162.
To Next Page
Loading...
