Ordering information 221
DC-side components (2×D8T, Rittal TS 8 enclosure)
Common DC Flat-PLS assembly
When using the Rittal Flat-PLS system, this kit is used for correct positioning of the
common DC bus in the Rittal TS 8 enclosure.
Note: The designs presented in this manual for Rittal TS 8 enclosures employ the Rittal
Flat-PLS busbar system. Make sure that the current carrying capability of the busbars is
not exceeded at any point of the drive system.
DC busbars
DC busbars connects the Flat-PLS busbars to the DC fuses.
Frame
size
Enclosure Qty Ordering code Kit code Illustration
All 400 mm 1 3AUA0000115906 A-468-X-001
Instruction code: 3AUA0000115891
Frame
size
Enclosure Qty Ordering code Kit code Illustration
2×D8T 600 mm 1 3AXD50000002490 A-6-8-202
Instruction code: 3AXD50000001867
To Next Page
Loading...
