242 Ordering information
Shrouds
Shrouds are used for IP20 touch protection with the cabinet doors open.
Ramp
The ramp is used for installing and replacing the R8i module in the Rittal TS 8 enclosure.
Note: Do not use the ramp with plinth heights over 100 mm. The ramp is designed for a
plinth height of 100 mm (the standard plinth height of Rittal TS 8 cabinets).
See the dimension drawing, see section Ramp on page 390.
Frame
size
Enclosure Qty Ordering code Kit code Illustration
1×R8i 400 mm 1 3AUA0000116182 A-4-8-353
Instruction code: 3AUA0000116148
Frame
size
Enclosure Qty Ordering code Kit code Illustration
R8i All 1 3AUA0000120467 A-468-8-304
To Next Page
Loading...
