ABB ACS880-04 - Page 302

302 Ordering information
Main circuit breaker and wagon cover
You must order one cover (1SDA0, 64003259) for the main circuit breaker. One cover
IP54 flange, key N.20005 E2.2…E6.2 (1SDA073869R1, 3AXD50000049760) is needed
for each main circuit breaker/wagon pair.
IEC busbar shim kits
See page 228.
 Main AC fuses
The AC fuses protect the input cables and the main contactor against short circuits. The
main AC fuses are used in such ACS880-04 configurations that there are a main switch-
disconnector and a main contactor, too. For the dimension drawings, see section Main AC
fuses on page 385.
 Supply unit AC fuses
These fuses protect the supply module for short circuits. Supply unit AC fuses are used in
such ACS880-04 configurations that there is a main circuit breaker, or a main switch-
disconnector and a main contactor in case of two or more supply modules (6-pulse) or four
or more supply modules (12-pulse). For the dimension drawings, see section AC fuses on
page 382.
ACS880-04-… Fuse (IEC) Qty Ordering code
Type Data
U
N
= 400 V (Range 380 … 415 V)
2210A-3+A004 170M7062 2000 A, 690 V 6 68689589
2610A-3+A004 170M7062 2000 A, 690 V 6 68689589
ACS880-04-…
Fuse (IEC) Qty Ordering code
Type Data
U
N
= 400 V (Range 380 … 415 V)
2210A-3+A004 170M6415 1100 A, 690 V 12 68731658
2610A-3+A004 170M6415 1100 A, 690 V 12 68731658
ACS880-04-… Fuse (UL, CSA) Qty Ordering code
Type Data
U
N
= 400 V (Range 380 … 415 V)
2210A-3+A004 170M6415 1100 A, 690 V 12 68731658
2610A-3+A004 170M6415 1100 A, 690 V 12 68731658