Operating Instructions
Busch-ComfortTouch
®
Cleaning
Operating Instructions | 1473-1-8041 — 86 —
Pos: 17.1 /Lay out bis 2014-11-1 1/Online-Doku mentation (+KNX) /Überschri ften (--> Für alle Dokumente < --)/1. Ebene/ P - R/Reinigung @ 21\mod_1328188 565860_15.doc x @ 138239 @ 1 @ 1
6 Cleaning
Pos: 17.2 /Lay out bis 2014-11-1 1/Online-Doku mentation (+KNX) /Reinigung/K NX/KNX-Aktorik/ ComfortPanel 3.0/ Bedienungsan leitungReinigung @ 40\mod_14187401 02503_15.doc x @ 309983 @ @ 1
Dirty units can be cleaned with a slightly moistened cloth. If this is insufficient, the cloth can be moistened also
with a soap solution.
Caution
Incorrect cleaning can damage the device!
Incorrect cleaning agents can cause permanent damage to the surface of the device.
- Never use caustic cleaning agents or solvents.
Note
"Cleaning blockage"
To ensure that no functions is triggered unintentionally when cleaning the Busch-ComfortTouch
®
,
the control elements can be blocked for a certain period.
The cleaning blockage is activated with a long press of the start button. It is
automatically deactivated after 30 seconds.
=== Ende der Liste für Textmarke Conten t ===
To Next Page
Loading...
