ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
IM/CM/I–EN Rev. P 37
…Device Setup
Custom Config Allows the device configuration to be backed-up (read) from the device, or written to the device
over the IrDA interface to a PC – see Section 9, page 85 – PC Configuration.
Loop 1 PV Sets the source for the (Loop 1) process variable.
Volume 1 Sets the source for Volume 1.
Loop 2 PV Sets the source for the (Loop 2) process variable.
Volume 2 Sets the source for Volume 2.
IrDA Configuration Allows the device configuration to be backed-up (read) from the device, or written to the device
over the IrDA interface to a PC – see Section 9, page 85 (PC Configuration).
Setup
Select Mode Select the IrDA Configuration operating mode.
Off IrDA Configuration mode is turned off.
Read-Only Enable reading of the device configuration.
Read/Write Enable reading and writing of the device configuration.
Config. Description A 24-character alphanumeric descriptor used to assist in identifying the configuration
that is read from or written to the device.
To Next Page
Loading...
