ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
IM/CM/I–EN Rev. P 39
…Display
Operator Functions
Autoscroll When enabled (On), operator pages are scrolled continuously at intervals of 10 seconds per page.
Soft Key Function Assigns a dedicated function to the Navigation key (right) – see page 7.
Configuration Displays the Access Level enabling selection of configuration levels.
Scroll View Scrolls through each available Operator view.
Alarm Ack. Acknowledges all active unacknowledged alarms.
Toggle Signal Provides a source that toggles between 2 states – can be assigned to outputs or used to select
sources.
Edge Signal Provides an edge-triggered source that is active on key press. Can be assigned to outputs or
select sources
Alarm Ack. Enable Turns on / off the ability to acknowledge alarms from the front panel.
Totalizer Stop/Go Starts / stops the totalizer.
Totalizer Reset Resets the totalizer.
Stats Reset Enable Turns on / off the ability to reset statistics from the front panel.
To Next Page
Loading...
