ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
40 IM/CM/I–EN Rev. P
…Display
Settings Adjusts display settings to suit local environmental conditions.
Brightness Increases / Decreases the display brightness.
Date & Time Sets the date format, local time and date and daylight saving start / end times.
Date Format Sets the indicator's date format.
Date & Time Sets the indicator's time and date.
Daylight Saving Sets daylight saving parameters.
DS Region Note. Daylight saving is disabled when DS Region is Off.
Europe Standard daylight saving start and end times are selected automatically for Europe.
USA Standard daylight saving start and end times are selected automatically for USA.
Custom Select to create custom daylight saving start / end times for regions other than Europe or USA
and to enable Daylight Start Time and Daylight End Time parameters.
DS Start Time
DS End Time
Selected from 1-hour increments.
Note. Displayed only when the DS Region sub-parameter is Custom.
To Next Page
Loading...
