ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
56 IM/CM/I–EN Rev. P
…Totalizer
Total DPs Selects the number of decimal places displayed on the totalizer value.
Preset Count The value the totalizer counts from and the value applied when the totalizer is reset.
Predet Count The value the totalizer stops or wraps.
Intermediate Count The value the intermediate count digital signal is activated. This can be used as an alarm threshold
to indicate when the
Predet Count value is about to be reached.
Wrap Enable If set to
On the total is reset automatically to the Preset Count value once the Predet Count value is
reached. The wrap digital signal is made active for a duration of 1 second.
If set to Off the count stops when the
Predet Count value is reached. The wrap digital signal is made
active until the Totalizer is reset.
Reset Source The source required to reset the totalizer value. Selection is made on the rising edge:
Reset Days Selects the day or days to reset the totalizer.
Reset Hour Selects the hour to reset the totalizer (the totalizer is always reset exactly on the hour).
To Next Page
Loading...
