ControlMaster CM15 and CMF160
Universal process indicator
1
/8 DIN 7 Advanced Level
IM/CM/I–EN Rev. P 71
…Functions
Real Time Alarms 2 Independent real-time alarms can be configured for activation on particular days and times for
a set duration.
Real Time Alarm 1 (2) Sets the days, month, time and duration the alarm is activated.
Monday (to Sunday)
Month enable When enabled (On), activates the alarm on the 1
st
day of each month.
Every hour When enabled (On), activates the alarm every hour.
On hour Sets the hour the alarm is activated – not applicable if Every hour is enabled.
On minute Set the minutes past the hour the alarm is activated.
Duration Set the duration the alarm is active.
Display enable If disabled (Off), the alarm state does not appear in the operator level diagnostics window
or the alarm log
Tag A 16-character alphanumeric diagnostic message displayed in the Diagnostic Status Bar and
the Diagnostic View in the
Operator Level – see Section 5, page 29.
To Next Page
Loading...
