Mechanical installation
34
3ADW000462R0401 DCS880 Hardware manual e d
Mounting the converter module H5 inside an enclosure
Cooling air inlet
The cooling fan blows the air out of the front, right and left side of the converter
module. View from:
Right side Front side Left side
Free space around the converter module
In mm:
Cooling air outlet
To avoid circulating air inside the enclosure make sure the exhaust air leaves the enclosure.
Mounting the converter module:
1. Remove the control panel and design cover:
3. Now all mounting holes are accessible:
Detail top:
2. Remove screws (T20) and pull out the fan box:
Detail bottom:
BG_880_015_H5_air flow_a.ai
air flow air flow air flow
To Next Page
Loading...
