3 Maintenance
3.4.3. Oil change, gearbox axis 4
3HAC022032-001 Revision: E104
© Copyright 2004-2008 ABB. All rights reserved.
2. Remove the upper oil plug, filling. Shown in the figure Location
of oil plugs on page 102.
3. Fill the gearbox with lubricating oil. Amount and art. no. is
specified in Required
equipment on page 102.
Correct oil level is specified
in section Inspection of oil
levels on page 98.
4. Clean and refit the oil plug.
Action Note/Illustration
Continued
To Next Page
Loading...
