ABB IRB 4400 - L30 - Risk of Disabling Function Reduced Speed 250 MM;S

1 Safety
1.2.3.5. Risk of disabling function "Reduced speed 250 mm/s"
3HAC022032-001 Revision: E26
© Copyright 2004-2008 ABB. All rights reserved.
1.2.3.5. Risk of disabling function "Reduced speed 250 mm/s"
Do not change "Transm gear ratio" or other kinematic system parameters from the
FlexPendant or a PC. This will affect the safety function "Reduced speed 250 mm/s".