3 Maintenance
3.1. Introduction
87 3HAC022032-001  Revision: E     
© Copyright 2004-2008 ABB. All rights reserved.
3 Maintenance
3.1. Introduction
Structure of this chapter
This chapter details all maintenance activities recommended for the robot and any external 
units of the robot.
It is based on the maintenance schedule, located in the beginning of the chapter. The schedule 
contains information about required maintenance activities including intervals and refers to 
procedures for the activities.
Each procedure contains all information required to perform the activity, that is required tools 
and materials.
The procedures are gathered in different sections, divided according to the maintenance 
activity.
Safety information
Before any service work is commenced, it is extremely important that all safety information 
is observed!
There are general safety aspects that must be read through, as well as more specific safety 
information that describe danger and safety risks when performing the procedures. Read the 
chapter Safety on page 13 before performing any service work.