4 Repair
4.7.8. Refitting of motor, axis 6
217 3HAC022032-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
19. Recalibrate the robot! Calibration is detailed in a
separate calibration manual,
enclosed with the calibration
tools.
General calibration
information is included in
section Calibration
information na str 235.
20.
Make sure all safety requirements are met when
performing the first test run. These are further
detailed in section DANGER - First test run may
cause injury or damage! on page 33.
Action Info/Illustration
Continued
To Next Page
Loading...
