2 DressPack and SpotPack
2.7.1 Introduction
3HAC 025861-001 Rev.E 103
Option Type Description
792-1 Water and Air unit, type S The basic water and air unit for type S is equipped for
a robot handled gun and with the following
components:
Water in circuit
Water return circuit
Air supply circuit
Split box
1/2 " hose between air supply circuit and manipulator
base (PROC 1)
1/2 " hose between water in circuit and manipulator
base (PROC 2)
1/2 " hose between water return circuit and
manipulator base (PROC 3)
792-2 Water and Air unit, type HS The basic water and air unit for type HS is equipped
for a pedestal/stationary gun.
Hoses between water and air unit, welding equipment
and robot are not supplied. These have to be
arranged by the customer.
792-6 Water and Air unit, type Sb The basic water and air unit for type S is equipped for
a robot handled gun and with the following
components:
Water in circuit
Water return circuit
Air supply circuit
Hoses connected directly from Dress Pack.
Only together with option 781-2.
797-1 Cable to split box, 7 m Offers floor cable of 7 m length for signals to the split
box placed on the water and air unit. This cable is
connected to the Spot Welding cabinet with a modular
Harting and it ends with a quick connector at the split
box.
797-2 Cable to split box, 15 m Offers floor cable of 15 m length for the split box. See
description of option 797-1.
797-3 Cable to split box, 22 m Offers floor cable of 22 m length for the split box. See
description of option 797-1.
797-4 Cable to split box, 30 m Offers floor cable of 30 m length for the split box. See
description of option 797-1.
To Next Page
Loading...
