1 Description
1.7.1 Introduction
34 Rev.E 3HAC 025861-001
1.7 Maintenance and Troubleshooting
1.7.1 Introduction
General
The robot requires only minimum maintenance during operation. It has been
designed to make it as easy to service as possible:
• Maintenance-free AC motors are used.
• Oil is used for the gear boxes.
• The cabling is routed for longevity, and in the unlikely event of a failure, its modular
design makes it easy to change.
Maintenance
The maintenance intervals depend on the use of the robot, the required maintenance
activities also depends on selected options. For detailed information on maintenance
procedures, see Maintenance section in the Product Manual.
To Next Page
Loading...
