2 DressPack and SpotPack
2.3.1 Introduction
62 Rev.E 3HAC 025861-001
Available configurations with linked option numbers are described below.
Option description
• Option 778-1. For the application Material Handling.
• Option 798-1. Base to axis 3. Offers DressPack Lower arm for Material Handling
application with internal routing from base to axis 3.
• Option 780-3 (and Option 798-1). Axis 3 to 6. Offers DressPack upper arm for Material
Handling application with external routing from axis 3 to 6.
Option Type Description
16-1 Connection to cabinet Floor cables and connections inside the I/O section
for the DressPack are chosen. The length and con-
figuration of the floor harness is specified under the
options below.
Option 94-1,-2,-3,-4 for parallel communication.
Option 90-2,-3,-4,-5 for parallel communication and
field bus communication with Can/DeviceNet.
Option 92-2,-3 for parallel communication and field
bus communication with Profibus.
455-1 Parallel communication Offers the signal cables needed for parallel commu-
nication in lower and upper arm DressPack. To be
combined with option 94-1,-2,-3,-4,-5.
455-4 Parallel and Bus communi-
cation
Offers the signal cables needed for the combination
of parallel and bus communication in lower and
upper arm DressPack. To be combined with
option 90-2,-3,-4,-5 or 92-2,-3.
To Next Page
Loading...
