2 DressPack and SpotPack
2.5.3 Interface description stationary gun
3HAC 025861-001 Rev.E 85
Required Water and Air unit options
The SpotPack IRB 6620 also requires Water and Air unit options to perform as
intended. These options are further described under chapters 2.7 Water and Air unit
and are also mentioned in this chapter.
Figure 54 Water and Air unit overview.
Option Type Description
792-2 Water and Air unit,
type HS (e)
Offers the basic water and air unit for type HS and
HSe including splitbox for signal distribution.
797-1 Cable to split box, 7 m Offers floor cable of 7 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
797-2 Cable to split box, 15 m Offers floor cable of 15 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
797-3 Cable to split box, 22 m Offers floor cable of 22 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
797-4 Cable to split box, 30 m Offers floor cable of 30 m length for signals between
the Spot Welding cabinet and to the split box placed
on the water and air unit.
To Next Page
Loading...
