Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 41.
2
xx2100001295
Screws: Torx pan head screw M4x8 (4 pcs)Refit the power unit and secure with the
screws.
3
Tightening torque: 1.7 Nm±10%
xx2100001335
xx2100001334
Insert the fan connector to the bracket.4
Continues on next page
132 Product manual - OmniCore E10
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3 Replacing the power unit
Continued
To Next Page
Loading...
