ABB XIO-08 - Cold Restart from the Device Loader

XIO USER MANUAL | 2106424MNAA | 171
To restart the controller using terminal mode:
Figure 9-30: Terminal menu option
Figure 9-31: Terminal mode warm restart
9.5.6 Cold restart from the device loader
This procedure performs the cold start from the 32-bit loader. Follow this procedure on a local or remote
loader connection. However, ABB highly recommends performing the cold restart locally. The cold restart
causes the device to restart using the startup (cold) configuration.
NOTICE
– Data Loss. Perform the procedures in section 9.1 Preserve data and configuration
before a
cold
start. This avoids loss of the data and the need for a complete system reconfiguration.
If the startup (
cold) configuration does not have the latest network connection configuration, the
restart causes loss of network connectivity. Updat
e the startup configuration (tfCold) to
avoid loss of
network connection and
required reconfiguration.
To complete a cold restart using the startup (cold) configuration: