ABB XIO-08 - Add and Export the IO Interface Application

90 | XIO USER MANUAL | 2106424MNAA
IMPORTANT NOTE
: To remove TFIO modules insert a small slotted screwdriver between the
connector and the housing and gently pry the module away from the XIO.
Proceed to configure the I/O Interface application next.
4.9.2 Add and export the I/O Interface application
IMPORTANT NOTE:
For additional details supporting TFIO modules see the link to the I/O
Interface Application Guide liste
d in Additional information.
To add the I/O Interface application and configure for export:
Figure 4-77: Add New Application: I/O Interface XSeries
Figure 4-78: I/O Interface in the XIO application table