82 | XIO USER MANUAL | 2106424MNAA
4.8.2 Configure the RMC
The RMC detects the Ethernet-Serial passthrough application instance(s) when activated on the XIO. This
procedure takes advantage of the RMC Auto discovery feature to assign a local communication application
to a remote COM port on the XIO.
To configure a serial communication application on the RMC for an XIO COM port:
Figure 4-66: Add/Modify Communication devices and applications
Figure 4-67: Assign XMV Interface to detected XIO port (shown in Remote Service field)
To Next Page
Loading...
