100 ZX2 GAS-INSULATED MEDIUM VOLTAGE SWITCHGEAR
—
9. List of tools
The tools required for assembly of the switchgear system are detailed
in the list below. Tools are not part of the ABB scope of supply.
All the tools listed must comply with the safety
regulations of the country concerned.
1 Temperature-compensated pressure gauge
with coupling, Fig. 3.3.1.1.1.3 (ABB part
number 1VB8004775R01xx)
1 Set of open-ended spanners, 8 to 19 mm AF
1 Set of ring spanners, 8 to 19 mm AF
1 Ratchet, 3/8”, with extensions and 8 to 19 mm
AF socket keys and 4 to 10 mm Allen key
inserts
1 Ratchet, ½”, with extensions and 10 to 19 mm
AF socket keys and 4 to 10 mm Allen key
inserts
1 Set of screwdrivers for slotted and cross-head
screws, sizes 1 to 3
1 Set of electrician’s pliers (end cutting nipper,
pointed pliers, flat end pliers, stripping tongs)
1 Rubber mallet
1 Set of fitter’s hammers
1 Leveller
1 Plumb bob
1 Guide string
1 Scribing iron
1 Punch
1 Tri-square
1 Tape measure
1 Calliper gauge
1 Continuity tester
1 Multimeter (voltage, current and resistance)
1 Torque wrench, 0 – 30 ft·lb, calibrated
1 Torque wrench, 30 - 75 ft·lb, calibrated
1 Extension cable, 230 V, 15 m long
1 Cable drum, 230 V / 16 A, 50 m
1 Angle grinder, small
1 Hand-held drill, chuck up to 13 mm
1 Hammer drill
1 Welding machine + accessories
1 Set of steel drill bits, 1 to 13 mm
1 Set of concrete drill bits, 6 to 12 mm
1 Steps, 8 rung
2 Trolley jacks (recommended capacity 2 t) or
2 Hydraulic lift trolleys
(recommended capacity 3.5 t per pair)
4 Lifting ropes, 0.75 m,
recommended capacity 1 t
4 Lifting ropes, 1.5 m,
recommended capacity 1 t
4 Shackles, capacity 1 t
2 Pinch bars
5 Handling tubes
2 Chain hoists, 0.25 t including chain
1 Site lighting
1 Torch
1 Hand-held lamp
1 Vacuum cleaner
Several wooden planks
Several wooden beams
Soft, non-fraying cleaning cloth
Household cleaner, chlorine-free
To Next Page
Loading...
