Machine Maintenance Procedures 3-33
4. Lift mainboard shielding until slots (H) are clear of mainboard connectors, as shown in
Figure 3-30.
Figure 3-30. Mainboard Shielding Slots
5. Remove mainboard shielding (J).
Mainboard Shielding Installation 0
1. Align slots (H) of mainboard shielding with mainboard connectors. (Figure 3-30)
2. Install mainboard shielding (J) to middle frame.
3. Connect TV tuner cable (F) to TV tuner module (G). (Figure 3-29)
4. Connect the following cables:
HDD cable (B) to mainboard connector (C)
HDD cable (D) to mainboard connector (E)
5. Install and secure screws (A) to middle frame.
6. Install back cover.
ID Size Quantity Screw Type
A M3.0x5.0 3
To Next Page
Loading...
