Acer Aspire Z1100 - Button Board Removal

Machine Maintenance Procedures 3-27
Button Board Removal 0
Prerequisite:
Back cover Removal
ODD Module Removal
1. Locate button board frame on front bezel. (Figure 3-22)
Figure 3-22. Button Board
2. Disconnect button board cable (C) from button board connector (B).
3. Remove screws (D) from front bezel.
4. Lift button board frame (A) from guidepin (E).
5. Move front bezel until button board frame is clear of latches (F), as shown in Figure 3-23.
Figure 3-23. Front bezel Latches
A
B
C
D
E
F
F
G