Acer Aspire Z1100 - RTC Battery Installation; RTC Battery Removal

Machine Maintenance Procedures 3-37
RTC Battery Removal 0
Prerequisite:
Mainboard Shielding Removal
1. Lift battery (A) from opening (B) on mainboard connector (C). (Figure 3-34)
Figure 3-34. RTC Battery
2. Remove battery from mainboard connector.
NOTE:
NOTE:
Follow local regulations for battery disposal.
RTC Battery Installation 0
1. Install battery (A) into mainboard connector (C). (Figure 3-34)
2. Press down to secure.
3. Install lower logic door.
C
A
B
C