Acer Aspire Z1100 - Setting a Password

System Utilities 2-9
Password on Boot must be set to Enabled to activate password feature.
Passwords are not case sensitive.
A password must be alphanumeric (A-Z, a-z, 0-9), not longer than 12 characters.
Setting a Password 0
Perform the following to set a new user or supervisor password:
1. Use the  and keys to highlight the Set Supervisor Password parameter and press
Enter. The Set Supervisor Password dialog box is shown. (Figure 2-5)
NOTE:
NOTE:
To change an existing password, refer to Changing a Password.
Figure 2-5. Setting a Password: Set Supervisor Password
2. Type a new password in the Enter New Password field and press Enter.
NOTE:
NOTE:
The following characters may be used in a password:
IMPORTANT:
+
Use care when typing a password. Characters do not appear on the screen.
3. Retype password in the Confirm New Password field and press Enter.
A-Z Alphabets A through Z (Not Case Sensitive)
0-9 Numerical Characters.
-Dash
= Equal Sign
[ Left Bracket
] Right Bracket
.Period
, Comma
; Semi-colon
/Slash
\ Back-slash